Analysis of color stability and degree of conversion of different types of resin composites

Abstract Resin composites containing surface pre-reacted glass (S-PRG) have been introduced to reduce demineralization and improve remineralization of the tooth structure. However, water diffusion within the material is necessary for its action, which can impair its overall physicomechanical properties over time, including color stability. This study aimed to evaluate the color stability and related degree of conversion (DC) of four resin composites. Discs (6 x 4 mm, n = 5/group) of microhybrid (MH), nanofilled (NF), nanohybrid (NH), and S-PRG-based nanohybrid (S-PRG-NH) composites with two opacities (A2/A2E and A2O/A2D) were prepared. Color (CIELab and CIEDE2000) was evaluated with a spectrophotometer after aging in grape juice (2 x 10 min/10mL/7days). The DC was analyzed by using Fourier transform infrared spectroscopy before and after light-curing. Data were statistically analyzed by using two-way analysis of variance and post-hoc least significant difference tests (p<0.05). In the color stability analysis, the interaction between filler type and opacity was significant (CIELab, p = 0.0015; CIEDE2000, p = 0.0026). NH presented the highest color stability, which did not differ from that of MH. The greatest color alteration was observed for S-PRG-NH. S-PRG fillers also influenced DC (p < 0.05). The nanohybrid resin composite presented favorable overall performance, which is likely related to its more stable organic content. Notwithstanding the benefits of using S-PRG-based nanohybrid resins, mostly in aesthetic procedures, professionals should consider the susceptibility of such resins to color alteration, probably due to the water-based bioactive mechanism of action.

PREVENTIVE EFFECT OF CRANBERRY GEL ON DENTIN SUBMITTED TO EROSION

Aims: Considering that Cranberry's components might inhibit dentin metalloproteinases exposed to erosive agents, the aim of this study was to evaluate in situeffect of a Cranberry gel application on dentin before an erosive challenge.Materials and methods: This crossover double-blinded study was performed in 2 phases of 5 days each, with 10 healthy volunteers who wore 2 palatal devices (1 for each phase) with 4 dentin specimens (2 specimens for each group). The groups under study were:First Phase: G1 -Erosivechallenge (Coca-cola®) over dentin without any previous treatment (1st negative control group); G2 -Erosive challenge over dentin previously treated with Cranberry gel (test group); and Second Phase: G3 -Erosive challenge over dentin previously treated with a gel without any active principle (2ndnegative control group); G4 -Erosive challenge over dentin previously treated with 0.12% Chlorhexidine gel (positive control group). Each device was immersed into the acid beverage, 3 times daily for 5 minutes during 5 days. Profilometry (µm) was used to quantify the dentin wear. Data were analyzed by Repeated Measures Analysis of Variance followed by Fisher's test (p<0.05).Results: Data (G1: 4.98 ± 1.36a; G2: 3.29 ± 1.16b; G3: 4.38 ± 1.19a; G4: 3.32 ± 1.55b) showed no statistical difference between G1 and G3. There was also no difference between G2 and G4. However, G2 and G4 presented lower wear when compared to G1 and G3, and this difference was statistically significant. Conclusion: The results of this studysuggest a significant efficacy of Cranberry gel in preventing wear of dentin subjected to dental erosion.

Effect of 10% Proanthocyanidin gel on demineralized organic matrix degradation: ELISA method / Efeito do gel de Proantocianidina a 10% na degradação da matriz orgânica desmineralizada: método ELISA

Objective: This study evaluated Proanthocyanidin protective effect on dentin subjected to erosion and its inhibition on degradation of the demineralized organic matrix (DOM). Material and Methods: The tested groups were: G1 - 10% Proanthocyanidin gel (test group), G2 - 1.23% NaF (positive control 1), G3 - 0.012% Chlorhexidine (positive control 2) and G4 ­ Placebo (negative control with no active compound) and two methodologies were performed: contact profilometry and ICTP ELISA method. To quantify dentin wear, profilometry was performed. Data were submitted to Analysis of Variance followed by Fisher's LSD Test. To assess the collagen degradation, ICTP ELISA method was performed. Data were submitted to the Kruskal-Wallis followed by the Dunn ́s test. Simple linear regression and Pearson Correlation test were also performed (p<0.05). Results: The profilometry showed significantly lower wear of G1 when compared to other groups and G2, G3 and G4, which did not present significant difference among them. In the ICTP ELISA analysis, G1 and G4 did not show significant differences and the same happened between G2 and G3. However, G1 and G4 had lower values of collagen degradation compared to groups G2 and G3. Data showed that degraded DOM is a significant predictor to explain the values obtained through the ICTP ELISA. Conclusions: The results allow to verify that 10% proanthocyanidin provided less tooth wear and decreased degradation of the DOM, suggesting a good ability to prevent dentin erosion. The regression analysis also suggests that contact profilometry is a good strategy to quantify dentin wear (AU)

Objetivo: Este estudo avaliou o efeito protetor da proantocianidina na dentina submetida à erosão e sua inibição na degradação da matriz orgânica desmineralizada (MOD). Material e Métodos: Os grupos testados foram: G1 - gel de Proantocianidina 10% (grupo teste), G2 - NaF 1,23% (controle positivo 1), G3 - Clorexidina 0,012% (controle positivo 2) e G4 - Placebo (controle negativo sem princípio ativo) e duas metodologias foram realizadas: perfilometria de contato e método ICTP ELISA. Para quantificar o desgaste da dentina, a perfilometria foi realizada. Os dados foram submetidos à Análise de Variância seguida do Teste LSD de Fisher. Para avaliar a degradação do colágeno, foi realizado o método ICTP ELISA. Resultados: Os dados foram submetidos ao teste de Kruskal-Wallis seguido do teste de Dunn. Regressão linear simples e teste de correlação de Pearson também foram realizados (p<0,05). A perfilometria mostrou desgaste significativamente menor do G1 quando comparado aos outros grupos e G2, G3 e G4, que não apresentaram diferença significativa entre si. Na análise ICTP ELISA, G1 e G4 não apresentaram diferenças significativas e o mesmo ocorreu entre G2 e G3. No entanto, G1 e G4 apresentaram valores menores de degradação do colágeno em relação aos grupos G2 e G3. Os dados mostraram que a MOD degradada é um preditor significativo para explicar os valores obtidos pelo ICTP ELISA. Conclusão: Os resultados permitem verificar que a proantocianidina a 10% proporcionou menor desgaste dentário e diminuição da degradação da MOD, sugerindo uma boa capacidade de prevenir a erosão dentinária. Também sugere que a perfilometria de contato é uma boa estratégia para quantificar o desgaste da dentina (AU)

Sodium trimetaphosphate combined to calcium as a strategy to improve dentin-bonding interface / Trimetafosfato de sódio associado ao cálcio como uma estratégia para melhorar a interface adesiva da dentina

Objective: The aim of this study was to evaluate the effect of STMP as biomimetic analog of dentin matrix on the dentin bond strength submitted to artificial cariogenic challenge over time. Material and Methods: The total number of teeth used in the experiment was 60 teeth, which were divided into 6 groups (n = 10). Of these total amount, 10 teeth were not submitted to the artificial cariogenic challenge (ACC), serving as control group (Sound Dentin - SD) while the other 50 were submitted to an ACC (7d/37ºC), being treated with treatment solutions according to each group: SD- deionized water/sound dentin, CD- deionized water/ artificial caries dentin, GIII- STMP, GIV- STMP + Ca(OH)2, GV- STMP + NaF, and GVI- NaF. After treatments (24h), the specimens were restored (Adper Single Bond Universal + Filtek Z250), to obtain resin­dentin sticks with a cross sectional area of 0.8mm2, approximately. Two-third of these sticks were stored in artificial saliva (37°C) for analyzes after 6 and 12 months. The 1/3 remains were subjected to µTBS test (baseline). Data were analyzed by two-way ANOVA and Tukey tests (p<0.05). Results: In general, the highest µTBS values were obtained in sound condition (SD), while the artificial caries condition (CD) determined minimum values. Groups treated with NaF (with or without STMP- GV and GVI) were not able to improve adhesion over time. Only the use of STMP + Ca(OH)2(GIV) improved the µTBS compared to the others caries-challenged dentin after 1 year. The adhesive failure pattern was predominant in all time. Conclusion: The use of the STMP associated with Ca(OH)2 seems to be a viable therapeutic strategy conciliating the biomimetizing capacity to the adhesive process satisfactorily even its performance is not superior to initial condition (AU)

Objetivo: O objetivo deste estudo foi avaliar o efeito do STMP como análogo biomimético da matriz dentinária na resistência de união à dentina submetida a desafio cariogênico artificial ao longo do tempo. Material e Métodos:foram utilizados um total de 60 dentes neste experimento, os quais foram divididos em 6 grupos (n = 10). Desse total, 10 dentes não foram submetidos ao desafio cariogênico artificial (DCA), servindo como grupo controle (Dentina Hígida - DH) enquanto os outros 50 foram submetidos ao DCA (7d / 37ºC), sendo tratados com soluções de tratamento específicas para cada grupo: DH- água deionizada / dentina hígida, DC- água deionizada / dentina submetida ao DCA, GIII- STMP, GIV- STMP + Ca(OH)2, GV- STMP + NaF e GVI- NaF. Após os tratamentos (24h), os corpos-de-prova foram restaurados (Adper Single Bond Universal + Filtek Z250), para obtenção de palitos de resina-dentina com área transversal de aproximadamente 0,8mm2. Dois terços desses palitos foram armazenados em saliva artificial (37°C) para análises após 6 e 12 meses. Os outros 1/3 foram submetidos ao teste µTBS (baseline). Os dados foram analisados por ANOVA a dois fatores e testes de Tukey (p <0,05). Resultados:Em geral, os maiores valores de µTBS foram obtidos em condição hígidas (DH), enquanto a condição subtmetidas ao DCA determinou os menores valores. Os grupos tratados com NaF (com ou sem STMP associado -GV e GVI) não foram capazes de melhorar a resistência de união, ao longo do tempo. Somente o uso de STMP + Ca (OH)2(GIV) melhorou o µTBS em comparação com as outras condições desafiadas por cárie após 1 ano. O padrão de falha adesiva foi predominante em todos os tempos. Conclusão: O uso do STMP associado ao Ca (OH)2 parece ser uma estratégia terapêutica viável conciliando a capacidade biomimetizante ao processo adesivo de forma satisfatória mesmo que seu desempenho não seja superior à condição inicial.(AU)

Presence of molar-incisor hypomineralization is associated with dental caries in Brazilian schoolchildren

Abstract This study aimed to identify the prevalence of molar-incisor hypomineralization (MIH) in schoolchildren and its association with dental caries experience. This was a cross-sectional study with a sample of 471 children aged 8 to 10 years. Data were collected via a sociodemographic questionnaire. Intra-oral clinical examination was done to identify and diagnose MIH (EAPD Criteria) as well as dental caries (ICDAS Index). Statistical analyses were performed with Person's Chi-square, Fisher's exact, and Mann-Whitney tests, and Poisson regression models were built. Statistical significance was set at an alpha-level of 0.05. The prevalence of MIH in our participants was 9.8%, with lesions being mostly of the mild form (65.2%) and affecting the first permanent molars but not the incisors in 54.2% of the children. Dental caries was observed in 88.1% of subjects. We observed a significant association between dental caries and the following variables: presence of MIH (p < 0.01; PR = 1.13), dental visit (p < 0.02; PR=0.92), and parents or legal guardians' education level (p < 0.05; PR = 1.07). A MIH diagnosis was also significantly associated with family income (p < 0.05; PR = 4.09). Children with MIH had more caries lesions on molar surfaces (p < 0.01; PR = 4.05). The prevalence of MIH was found to be moderate, based on previous studies, and the presence of enamel defect was associated with dental caries. The teeth most affected by MIH lesions were the first permanent molars.

Nursing training program in childrens hearing health: a proposal for interactive tele-education / Capacitación de enfermeros en salud auditiva infantil: una propuesta de teleducación interactiva / Capacitação dos enfermeiros em saúde auditiva infantil: uma proposta de teleducação interativa

ABSTRACT Objective: To verify the effectiveness of a nursing training program in the area of children's hearing health using interactive tele-education. Methods: Interrupted time series with non-random control group pre-test/ post-test. A cohort of 41 nurses, with no previous formal training in hearing health. A "Children's Hearing Health" Cybertutor was employed. The effectiveness of the nursing training was verified by comparing pre- versus post-training performance and by analyzing responses to an evaluation questionnaire. Results: Following training, the performance was significantly better in all domains assessed and in the total score. The evaluation questionnaire demonstrated that the Cybertutor was well accepted and the performance revealed in the pre-training phase demonstrated the need for children´s hearing health training. Conclusion: The effectiveness of the nursing training program in the area of Children's Hearing Health using interactive tele-education could be proven, since there was an improvement in performance in all domains evaluated.

RESUMEN Objetivo: verificar la eficacia de un tutor electrónico - cybertutor en la formación de enfermeros en el área de salud auditiva infantil. Métodos: series temporales interrumpidas con grupo control pretest/posttest no aleatorio. Participaron 41 enfermeros, que fueron capacitados a través de un Cybertutor denomidado "Salud auditiva infantil". La eficacia de la capacitación se verificó comparando el desempeño de los enfermeros en los cuestionarios pre y post capacitación, y la evaluación del Cybertutor se investigó a través de un formulario con preguntas cerradas y abiertas. Resultados: El desempeño en el cuestionario precapacitación demostró la necesidad de capacitación en salud auditiva infantil. Hubo una diferencia en el desempeño después del entrenamiento en todos los dominios evaluados y en el puntaje total. Conclusión: La efectividad del cybertutor en la capacitación de enfermeras en el área de Salud Auditiva Infantil podría demostrarse, ya que hubo una mejora en el rendimiento en todos los dominios evaluados.

RESUMO Objetivo: verificar a eficácia de um tutor eletrônico - cybertutor na capacitação de enfermeiros na área de saúde auditiva infantil. Métodos: séries temporais interrompidas com grupo controle pré-teste/pós-teste não randomizado. Participaram 41 enfermeiros que foram capacitados por meio de um Cybertutor denominado "Saúde Auditiva Infantil". A eficácia da capacitação foi verificada a partir da comparação do desempenho dos enfermeiros, nos questionários pré e pós-capacitação, e a avaliação do Cybertutor foi investigada por meio de um formulário com perguntas fechadas e abertas. Resultados: O desempenho no questionário pré-capacitação demonstrou a necessidade da capacitação em saúde auditiva infantil. Houve diferença no desempenho após a capacitação em todos os domínios avaliados e no escore total. Conclusão: A eficácia do cybertutor na capacitação de enfermeiros na área de Saúde Auditiva Infantil pôde ser comprovada, uma vez que houve melhora no desempenho em todos os domínios avaliados.

Non-inferiority clinical trials: importance and applications in health sciences

Abstract Non-inferiority randomized clinical trials are indicated when it is intended to prove that an experimental group is not inferior to a control group by more than a margin of non-inferiority. However, this type of study differs from traditional randomized clinical trials (superiority studies) because they have particularities that impact on the formulation of hypothesis to be tested, experimental design (non-inferiority margin determination, adapted sample size calculation, sensitivity of the study and data final analysis) and also on the presentation of data when writing the manuscript. Therefore, this article aims to present and discuss the particularities of non-inferiority clinical studies, since these requirements are fundamental to guarantee the validity of the conclusions of this type of study.

In situ effect of a proanthocyanidin mouthrinse on dentin subjected to erosion

Abstract Proanthocyanidin has been shown to be efficient in inhibiting matrix metalloproteinases. Objective The aim of this in situ study was to evaluate the protective effect of Proanthocyanidin-based mouthrinses either with naturally acidic or with a neutral pH applied on dentin subjected to erosion. Methodology Eight volunteers wore one palatal device in two phases (7 days washout) with 16 samples per group (n=8). The groups under study were: First Phase/ G1 - 10% proanthocyanidin mouthrinse (pH 7.0, Experimental group 1 - Purified Grape Seeds Oligomeric Proanthocyanidins), G2 - 10% proanthocyanidin mouthrinse (pH 3.0, Experimental group 2 - Purified Grape Seeds Oligomeric Proanthocyanidins). Second Phase/ G3 - 0.12% chlorhexidine mouthrinse (pH 7.0, Positive control group), G4 - no previous treatment (Negative control group). Each device was subjected to 3 erosive cycles (5 minutes) per day for 5 days. Treatments with different mouthrinses were applied once after the second erosive challenge (5 minutes). Profilometry was used to quantify dentin loss (µm). Results Data were analyzed by repeated measures of ANOVA followed by Fisher's test (p<0.05). G1 (1.17±0.69) and G3 (1.22±0.25) showed significantly lower wear values with no statistical difference between them. G2 (2.99±1.15) and G4 (2.29±1.13) presented higher wear values with no significant differences between them. Conclusion The 10% proanthocyanidin mouthrinse (pH 7.0) could be a good strategy to reduce dentin wear progression.

Limitation of diagnostic value of cone-beam CT in detecting apical root isthmuses

Abstract Isthmuses are reported as common anatomic complexities in teeth often associated with failures in endodontic treatment. They should be considered before starting treatment and a preoperative computed tomography scan (CT) may demonstrate these complexities. Objective To assess the diagnostic value of the highest resolution settings of a cone-beam CT (CBCT) system in identifying and measuring apical isthmuses, using micro-CT as reference. Methodology After micro-CT scanning, 40 humans' lower first molars with isthmuses in the apical-3 mm of mesial roots were scanned by the highest resolution settings of the New Generation i-Cat ® CBCT equipment. Two blinded observers recorded the detection of isthmuses in CBCT scans. The lengths of isthmuses were compared between micro-CT and CBCT to assess the diagnostic value of CBCT. Quantitative data for sensitivity were represented as percentages (95% confidence interval). The Bland-Altman method was used to assess differences between gold standard lengths (micro-CT) and CBCT lengths. Results BCT demonstrated 30 positive findings, representing sensitivity for isthmus identification of 75% (95% CI=0.4114-1.1364). Differences between the lengths in micro-CT (1.99±0.40 mm) and CBCT (1.53±0.41 mm) were significant (p<0.0001). Conclusion The CBCT device used presented limited diagnostic value in the identification and measurement of apical isthmuses in the mesial roots of lower molars. In some cases, the actual anatomy of the apical root canal may not be completely delineated in this type of CBCT system, even using the highest resolution settings.

In Situ Effect of Intra-Oral Application of Pastes Containing CPP-ACP or CPP-ACPF Against Initial Enamel Erosion

Objective: To evaluate in situ the effect of toothpastes containing casein phosphopeptide - amorphous calcium phosphate (CPP-ACP) and casein phosphopeptide-amorphous calcium phosphate associated to fluoride (CPP-ACPF) on initial erosion prevention. Material and Methods: Bovine enamel blocks (n = 192) were randomly assigned into 4 phases according to the baseline surface hardness: GI: CPP-ACP Paste (MI Paste™), GII: CPP-ACPF Paste (MI Paste Plus™), GIII: Fluoridated paste and GIV: Placebo Paste. In each of the 4 crossover phases, twelve volunteers wore intraoral palatal appliances containing 4 enamel blocks for 2 hours, then the tested treatments were applied intraorally (3 min) and the appliance was maintained in the mouth for another 3 hours. After, the appliances were removed and immersed in hydrochloric acid (0.01 M, pH 2.3) for 30 seconds to promote erosive demineralization. The final surface hardness was evaluated and percentage of surface hardness loss was calculated. The data were analyzed by ANOVA and Tukey's test (α = 5%). Results: The application of CPP-ACP paste, independent of fluoride content, resulted in significant lower enamel hardness loss (GI: 9.26% ±3.48 and GII: 9.14% ±1.73) compared to NaF (GIII: 15.5% ± 3.94) and placebo (GIV: 16.7% ± 4.07) pastes, which did not show difference between them. Conclusion: The CPP-ACP pastes were able to reduce initial erosive demineralization in relation to fluoride and placebo pastes. Nevertheless the formulation of CPP-ACP with fluoride did not provide an additional benefit.

The use of remote microphone systems in unilateral hearing loss: a preliminary study among Brazilian children and teenagers

Abstract Due to the large number of individuals with Unilateral Hearing Loss (UHL) and the recommendation to use hearing assistive devices, studies are required to define possibilities of intervention for this population. Objective: To evaluate the performance of the Remote Microphone System (RMS) in children with UHL. Methodology: Prospective clinical study with a convenience sample. Eleven children (mean age of 9.2 years) with severe and profound sensorineural UHL, hearing aid users and enrolled in regular schools participated in the study. They were evaluated using the Hearing in Noise Test (HINT), the Classroom Participation Questionnaire (CPQ), and the Sustained Auditory Attention Ability Test (SAAAT) with RMS. Results: HINT results were analyzed using variance to three criteria of repeated measures, which revealed differences between intervention, position, and time factors and significant interaction between these three factors. The comparative analysis of the results from CPQ showed significant differences in the statistical t-test (p=<0.001) for all subscales. The analysis of variance at two repeated measures criteria used in the study of SAAAT revealed a difference between intervention and time, and both interacted significantly. Conclusion: The RMS associated with a hearing aid was effective for individuals with UHL.

Effect of vegetable oils applied over acquired enamel pellicle on initial erosion

Abstract Objective The prevalence of dental erosion has been recently increasing, requiring new preventive and therapeutic approaches. Vegetable oils have been studied in preventive dentistry because they come from a natural, edible, low-cost, and worldwide accessible source. This study aimed to evaluate the protective effect of different vegetable oils, applied in two concentrations, on initial enamel erosion. Material and Methods Initially, the acquired pellicle was formed in situ for 2 hours. Subsequently, the enamel blocks were treated in vitro according to the study group (n=12/per group): GP5 and GP100 - 5% and pure palm oil, respectively; GC5 and GC100 - 5% and pure coconut oil; GSa5 and GSa100 - 5% and pure safflower oil; GSu5 and GSu100 - 5% and pure sunflower oil; GO5 and GO100 - 5% and pure olive oil; CON− - Deionized Water (negative control) and CON+ - Commercial Mouthwash (Elmex® Erosion Protection Dental Rinse, GABA/positive control). Then, the enamel blocks were immersed in artificial saliva for 2 minutes and subjected to short-term acid exposure in 0.5% citric acid, pH 2.4, for 30 seconds, to promote enamel surface softening. The response variable was the percentage of surface hardness loss [((SHi - SHf) / SHf )×100]. Data were analyzed by one-way ANOVA and Tukey's test (p<0.05). Results Enamel blocks of GP100 presented similar hardness loss to GSu100 (p>0.05) and less than the other groups (p<0.05). There was no difference between GP5, GC5, GC100, GSa5, GSu100, GSa100, GSu5, GO5, GO100, CON− and CON+. Conclusion Palm oil seems to be a promising alternative for preventing enamel erosion. However, further studies are necessary to evaluate a long-term erosive cycling.

In situ effect of CPP-ACP chewing gum upon erosive enamel loss

Abstract Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) is able to increase salivary calcium and phosphate levels at an acidic pH. Previous studies demonstrated that a CPP-ACP chewing gum was able to enhance the re-hardening of erosion lesions, but could not diminish enamel hardness loss. Therefore, there is no consensus regarding the effectiveness of CPP-ACP on dental erosion. Objective This in situ study investigated the ability of a CPP-ACP chewing gum in preventing erosive enamel loss. Material and Methods: During three experimental crossover phases (one phase per group) of seven days each, eight volunteers wore palatal devices with human enamel blocks. The groups were: GI - Sugar free chewing gum with CPP-ACP; GII - Conventional sugar free chewing gum; and GIII - No chewing gum (control). Erosive challenge was extraorally performed by immersion of the enamel blocks in cola drink (5 min, 4x/day). After each challenge, in groups CPP and No CPP, volunteers chewed one unit of the corresponding chewing gum for 30 minutes. Quantitative analysis of enamel loss was performed by profilometry (µm). Data were analyzed by Repeated-Measures ANOVA and Tukey's test (p<0.05). Results The use of chewing gum (CPP and No CPP) resulted in lower erosive enamel loss compared with the control group (p<0.05). CPP-ACP chewing gum (CPP) did not improve the protection against erosive enamel loss compared with conventional chewing gum (No CPP) (p>0.05). Conclusion The CPP-ACP chewing gum was not able to enhance the anti-erosive effect of conventional chewing gum against enamel loss.

Validade e confiabilidade da triagem: "teste da linguinha" / Validity and reliability of the neonatal tongue screening test

RESUMO Objetivo: verificar as propriedades psicométricas de validade e confiabilidade, bem como a sensibilidade, especificidade e valores preditivos da Triagem Neonatal proposta a partir do Protocolo de Avaliação do Frênulo da Língua em Bebês. Métodos: estudo experimental retrospectivo, utilizando os dados de 100 bebês. Os bebês foram avaliados nas primeiras 48 horas por meio da triagem e com 30 dias utilizando o Protocolo de Avaliação do Frênulo da Língua em Bebês. As imagens e dados de todos os bebês foram coletados pela fonoaudióloga (A1) e analisados pela fonoaudióloga (A2). Os casos com alteração do frênulo foram submetidos à frenotomia, reavaliados 30 dias após o procedimento e acompanhados até o 6º mês. Os dados foram utilizados para as etapas de validação: análise de concordância entre examinadores; análise de concordância intra-examinador; validade de critério; análise da validade de construto; análise de sensibilidade, especificidade, valores preditivos positivo e negativo. Os dados foram submetidos ao tratamento estatístico. O estudo foi aprovado pelo Comitê de Ética em pesquisa sob o número CAAE 40784315.9.0000.5538. Resultados: a Triagem Neonatal identificou os bebês com alteração do frênulo e as mudanças ocorridas após a frenotomia e apresentou bons índices de sensibilidade, especificidade e valores preditivos. A confiabilidade entre e intra-examinadores permite afirmar que os dados obtidos com a triagem são confiáveis e podem ser reproduzidos. Conclusão: a Triagem Neonatal do Protocolo de Avaliação do Frênulo da Língua em Bebês mostrou ser um instrumento válido e confiável, assegurando acurácia no diagnóstico das alterações do frênulo lingual em bebês.

ABSTRACT Purpose: to verify the psychometric properties - validity and reliability - and the sensitivity, specificity and predictive values of the "Neonatal Tongue Screening Test" from the Lingual Frenulum Protocol for Infants. Methods: this is an experimental retrospective study using data from 100 newborns. The infants were assessed within the first 48 hours after birth using the Neonatal Tongue Screening Test, and subsequently assessed at 30 days of life using the Lingual Frenulum Protocol for Infants. The assessments were performed by examiner 1, who collected images and data to be analyzed by examiner 2. Newborns with lingual frenulum alterations were referred to frenotomy, reassessed 30 days after surgery and followed until six months of life. Data were used for the validation process, which included the analyses of inter-intra rater agreement, criterion validity, construct validity, sensitivity, specificity, positive predictive value, and negative predictive value. Data were statistically treated. The study was approved by the Ethics Committee under the number CAAE 40784315.9.0000.5538. Results: the "Neonatal Screening Test" was able to identify newborns with lingual frenulum alteration and the changes after frenotomy; furthermore, the results demonstrated adequate values of sensitivity, specificity, and predictive values. Concerning inter-intra rater agreement, the consistency of results demonstrated reliability and excellent repeatability. Conclusion: the "Neonatal Tongue Screening Test" has demonstrated to be a valid and reliable assessment tool ensuring accuracy to diagnose lingual frenulum alterations in newborns.

Porosity of temporary denture soft liners containing antifungal agents

ABSTRACT Incorporation of antifungals in temporary denture soft liners has been recommended for denture stomatitis treatment; however, it may affect their properties. Objective: To evaluate the porosity of a tissue conditioner (Softone) and a temporary resilient liner (Trusoft) modified by minimum inhibitory concentrations (MICs) of antifungal agents for Candida albicans biofilm. Material and Methods: The porosity was measured by water absorption, based on exclusion of the plasticizer effect. Initially, it was determined by sorption isotherms that the adequate storage solution for specimens (65×10×3.3 mm) of both materials was 50% anhydrous calcium chloride (S50). Then, the porosity factor (PF) was calculated for the study groups (n=10) formed by specimens without (control) or with drug incorporation at MICs (nystatin: Ny-0.032 g, chlorhexidine diacetate: Chx-0.064 g, or ketoconazole: Ke-0.128 g each per gram of soft liner powder) after storage in distilled water or S50 for 24 h, seven and 14 d. Data were statistically analyzed by 4-way repeated measures ANOVA and Tukey's test (α=.05). Results: Ke resulted in no significant changes in PF for both liners in water over 14 days (p>0.05). Compared with the controls, Softone and Trusoft PFs were increased at 14-day water immersion only after addition of Ny and Chx, and Chx, respectively (p<0.05). Both materials showed no significant changes in PF in up to 14 days of S50 immersion, compared with the controls (p>0.05). In all experimental conditions, Softone and Trusoft PFs were significantly lower when immersed in S50 compared with distilled water (p<0.05). Conclusions: The addition of antifungals at MICs resulted in no harmful effects for the porosity of both temporary soft liners in different periods of water immersion, except for Chx and Ny in Softone and Chx in Trusoft at 14 days. No deleterious effect was observed for the porosity of both soft liners modified by the drugs at MICs over 14 days of S50 immersion.

Water interaction and bond strength to dentin of dye-labelled adhesive as a function of the addition of rhodamine B

ABSTRACT Objective This study investigated the effect of the fluorescent dye rhodamine B (RB) for interfacial micromorphology analysis of dental composite restorations on water sorption/solubility (WS/WSL) and microtensile bond strength to dentin (µTBS) of a 3-step total etch and a 2-step self-etch adhesive system. Material and Methods The adhesives Adper Scotchbond Multi-Purpose (MP) and Clearfil SE Bond (SE) were mixed with 0.1 mg/mL of RB. For the WS/WSL tests, cured resin disks (5.0 mm in diameter x 0.8 mm thick) were prepared and assigned into four groups (n=10): MP, MP-RB, SE, and SE-RB. For µTBS assessment, extracted human third molars (n=40) had the flat occlusal dentin prepared and assigned into the same experimental groups (n=10). After the bonding and restoration procedures, specimens were sectioned in rectangular beams, stored in water and tested after seven days or after 12 months. The failure mode of fractured specimens was qualitatively evaluated under optical microscope (x40). Data from WS/WSL and µTBS were assessed by one-way and three-way ANOVA, respectively, and Tukey’s test (α=5%). Results RB increased the WSL of MP and SE. On the other hand, WS of both MP and SE was not affected by the addition of RB. No significance in µTBS between MP and MP-RB for seven days or one year was observed, whereas for SE a decrease in the µTBS means occurred in both storage times. Conclusions RB should be incorporated into non-simplified DBSs with caution, as it can interfere with their physical-mechanical properties, leading to a possible misinterpretation of bonded interface.

CO2 laser and/or fluoride enamel treatment against in situ/ex vivo erosive challenge

ABSTRACT Objective This in situ/ex vivo study investigated the effect of CO2 laser irradiation and acidulated phosphate fluoride gel (APF) application, separately and in combination, on enamel resistance to erosion. Material and Methods During 2 experimental 5-day crossover phases, 8 volunteers wore intraoral appliances containing bovine enamel blocks which were submitted to four groups: 1st phase - control, untreated and CO2 laser irradiation, 2nd phase - fluoride application and fluoride application before CO2 laser irradiation. Laser irradiation was performed at 10.6 µm wavelength, 5 µs pulse duration and 50 Hz frequency, with average power input and output of 2.3 W and 2.0 W, respectively (28.6 J/cm2). APF gel (1.23%F, pH 3.5) was applied on enamel surface with a microbrush and left on for 4 minutes. Then, the enamel blocks were fixed at the intraoral appliance level. The erosion was performed extraorally 4 times daily for 5 min in 150 mL of cola drink. Enamel loss was measured profilometrically after treatment and after the in situ phase. The data were tested using one-way Repeated Measures Anova and Tukey's test (p<0.05). Results CO2 laser alone (2.00±0.39 µm) did not show any significantly preventive effect against enamel erosion when compared with the control group (2.41±1.20 µm). Fluoride treated enamel, associated (1.50±0.30 µm) or not (1.47±0.63 µm) with laser irradiation, significantly differed from the control. Conclusion The APF application decreased enamel wear; however, CO2 laser irradiation did not enhance fluoride ability to reduce enamel wear.

Vibrant Soundbridge and Bone Conduction Hearing Aid in Patients with Bilateral Malformation of External Ear

Introduction Hearing loss is the most common clinical finding in patients with malformation of the external ear canal. Among the possibilities of treatment, there is the adaptation of hearing aids by bone conduction and the adaptation of implantable hearing aids. Objective To assess speech perception with the use of Vibrant Soundbridge (VBS - MED-EL, Innsbruck, Austria) associated with additional amplification in patients with bilateral craniofacial malformation. Method We evaluated 11 patients with bilateral malformation over 12 years with mixed hearing loss or bilateral conductive. They were using the Softband (Oticon Medical, Sweden) and bone conduction hearing aid in the ear opposite the one with the VSB.We performed the evaluation of speech perception using the Hearing in Noise Test. Results Participants were eight men and three women with a mean of 19.5 years. The signal / noise ratio presented significant results in patients fitted with VSB and bone conduction hearing aid. Conclusion The results of speech perception were significantly better with use of VBS combined with bone conduction hearing aids.

Influence of pH, bleaching agents, and acid etching on surface wear of bovine enamel

ABSTRACT Development of new materials for tooth bleaching justifies the need for studies to evaluate the changes in the enamel surface caused by different bleaching protocols. Objective The aim of this study was to evaluate the bovine dental enamel wear in function of different bleaching gel protocols, acid etching and pH variation. Material and Methods Sixty fragments of bovine teeth were cut, obtaining a control and test areas. In the test area, one half received etching followed by a bleaching gel application, and the other half, only the bleaching gel. The fragments were randomly divided into six groups (n=10), each one received one bleaching session with five hydrogen peroxide gel applications of 8 min, activated with hybrid light, diode laser/blue LED (HL) or diode laser/violet LED (VHL) (experimental): Control (C); 35% Total Blanc Office (TBO35HL); 35% Lase Peroxide Sensy (LPS35HL); 25% Lase Peroxide Sensy II (LPS25HL); 15% Lase Peroxide Lite (LPL15HL); and 10% hydrogen peroxide (experimental) (EXP10VHL). pH values were determined by a pHmeter at the initial and final time periods. Specimens were stored, subjected to simulated brushing cycles, and the superficial wear was determined (μm). ANOVA and Tukey´s tests were applied (α=0.05). Results The pH showed a slight decrease, except for Group LPL15HL. Group LPS25HL showed the highest degree of wear, with and without etching. Conclusion There was a decrease from the initial to the final pH. Different bleaching gels were able to increase the surface wear values after simulated brushing. Acid etching before bleaching increased surface wear values in all groups.